Editorial Team · Updated
Cutlist Optimizer
Plan cutting layouts, reduce material waste and optimize sheet usage directly in your browser — free, instant, no sign-up.
Layout strategies per run
32
Part instances supported
1,000
Calculation precision
0.01 mm
Stock sheet
Parts to cut
9 parts in the list
| Part | Width (mm) | Height (mm) | Qty | Can rotate | |
|---|---|---|---|---|---|
Cut settings
Material your saw blade removes per cut
Keep-out distance from every sheet edge
Allow rotating parts
Everything runs in your browser — your cut list is never uploaded.
No results yet
Add your parts above and run the optimizer to see the layout, sheet count, efficiency and waste.
This cutlist optimizer gives you a full sheet-cutting planner that runs entirely in your browser. Enter your stock sheet, type in the parts you need, set your saw kerf, and the cut list optimizer computes the tightest nesting layout across as many sheets as required. Nothing to install, nothing to register — the cutlist optimizer works in any desktop or laptop browser.
The result is a complete workshop package: sheet-by-sheet SVG cutting diagrams, a summary of sheets used, material efficiency and waste percentage, plus a printable cut list. Woodworkers, cabinet makers, carpenters and DIY builders use this cutlist optimizer to stop guessing how many boards a project needs — and to stop throwing money away as offcut waste.
How this cutlist optimizer works
The tool is built around a proven two-dimensional nesting engine with two cutting modes. Guillotine mode — the default — plans layouts that a table saw, panel saw or track saw can actually execute, because every cut runs edge to edge across the board. Free nesting mode packs rectangles as tightly as possible for CNC and router work. In both modes the cutlist optimizer tries multiple packing strategies and part orderings, then keeps whichever candidate plan uses the fewest sheets and wastes the least area.
Because the computation happens in a Web Worker, even large lists of several hundred parts never freeze the page. You keep typing while the cutlist optimizer crunches placements in the background, and results appear in a second or two. Everything is computed locally: your project dimensions never leave your browser.
What the cutlist optimizer needs from you
Three inputs are enough. First, the stock sheet: width, height and how many sheets you have — 2440 × 1220 mm is preloaded, with one-click presets for common plywood and MDF sizes. Second, the parts list: label, width, height and quantity for every piece, with a rotation checkbox per part. Third, cut settings: blade kerf, edge margin and whether rotation is allowed. Press Optimize Cut List and the cutlist optimizer does the rest.
What you get back
The cutlist optimizer reports the number of sheets used, overall material efficiency, waste percentage and every placed part. Each sheet renders as an SVG cutting diagram with part labels, dimensions and rotation markers, followed by a full cut list table you can print or download as CSV. If any part cannot be placed — too large, or the sheet quantity ran out — the cutlist optimizer explains exactly why instead of failing silently.
Why a cut list optimizer beats graph paper
Manual cut planning on paper caps out quickly. Once a project has more than a handful of parts, humans leave gaps that a nesting engine simply does not. Typical manual layouts sit at 70–75% material utilization; the same lists run through a cutlist optimizer usually reach 82–90%. On a twenty-sheet order that is two to four full sheets of plywood saved, every single time the list is cut.
A desktop browser is also where cut planning is genuinely comfortable. On a large screen you can see the whole sheet layout at once, compare sheet after sheet, edit the parts table with a real keyboard and print the result for the workshop. That is why this page puts the working cutlist optimizer right at the top instead of hiding it behind a download or a sign-up wall.
Utilization math stays honest, too. Material efficiency is simply total part area divided by the total sheet area the plan opened, kerf included — ninety percent means only a tenth of what you bought ends up as offcut. And not all waste is equal: a single large offcut is storeroom inventory, while ten scattered slivers are firewood. The diagrams let you judge that by eye.
Free, private and instant
The cutlist optimizer is free with no account, no trial and no watermark. Your parts list is stored only in your own browser via localStorage, so closing the tab keeps your data for the next visit while nothing is ever uploaded to a server. That makes the tool safe for quoting client work: dimensions of a customer's kitchen never sit on anyone else's computer.
Kerf, rotation and margins — the details that decide waste
Blade kerf is the material your saw removes, typically 3 mm for a circular saw blade or 2.4 mm for a panel saw. The cutlist optimizer expands every part by the kerf value when placing it, so two parts are never drawn closer than one blade width. Ignore kerf and your beautiful layout will not physically fit once you start cutting; include it, as this tool does, and the diagram matches reality.
Rotation matters just as much. Parts marked rotatable can be turned 90° to fill gaps, often squeezing a whole extra column of shelves out of a sheet. Grain-sensitive work — door fronts, quartersawn stock — simply leaves the checkbox off and the cut list optimizer keeps every piece oriented exactly as you entered it. Edge margin adds a keep-out border for factory edges or clamping space, and the cutlist optimizer respects it on all four sides.
Cutting layouts you can actually follow in the shop
A cutlist optimizer is only useful if its output survives contact with a table saw. Every sheet in the result is drawn to scale with labeled parts and dimensions inside each rectangle, so you can read the plan straight off the screen or off a printout. Rotated parts carry a marker so you know the piece was turned. The cut list table underneath lists each part with its size and target sheet, in placement order.
Export is deliberately simple: one click downloads the whole plan as CSV for spreadsheets, and the browser's print dialog produces a clean workshop copy — the page strips navigation and prints only the layouts and cut list. Whether you cut with a track saw, a panel saw or a CNC, the geometry this cutlist optimizer produces is the same information, in the order you need it.
One honest limit: an optimizer arranges rectangles. It cannot read grain through a veneer or know that a door must bookmatch its neighbor — encode those rules yourself by switching rotation off for grain-critical parts. The engine is otherwise material-agnostic, so the same cut list optimizer workflow covers plywood, MDF, melamine, foam board and acrylic.
More cutting tools that share the same engine
This cutlist optimizer is the centerpiece of a small family of focused cutting tools. A dedicated cut sheet builder formats parts lists into a printable worksheet. A ply board calculator answers pure quantity questions by area. A plywood cut calculator applies the same nesting engine with plywood defaults, while a cutting board calculator plans glue-up strips and a 5-cut method calculator calibrates your table saw sled to 0.001 in. Each page keeps its tool in the first screen — exactly like this one.
Frequently asked questions
Is this cutlist optimizer really free?
Yes. The cutlist optimizer is completely free with no sign-up, no usage limits and no watermarks on exports. It runs in your browser, so there is no server cost per calculation.
Does the cut list optimizer need installing or an account?
No. The cutlist optimizer runs in Chrome, Edge, Firefox or any modern browser on Windows, macOS or Linux. Nothing is installed, no account is required, and the tool loads instantly.
What units does the cutlist optimizer support?
Millimeters, centimeters, meters and inches. Switching units makes the cutlist optimizer reload matching presets: 2440 × 1220 mm for metric sheet goods, 4 × 8 ft for imperial plywood. Kerf and margins follow the same unit.
How does kerf affect the cutting layout?
Kerf is the width of material your blade removes. The cutlist optimizer enlarges every part by the kerf value during placement so no two parts are closer than one blade width, keeping the printed layout physically cuttable.
How much material does a cutlist optimizer actually save?
Typical manual layouts sit at 70–75% utilization. The same lists usually reach 82–90% after the cutlist optimizer repacks them, which on a ten-sheet order means one to two sheets saved — every time the list is cut.
How is this different from a cutting diagram in SketchUp or Excel?
Manual layouts depend on the patience of the person dragging rectangles. The cutlist optimizer evaluates thirty-two packing strategies per job in milliseconds and mathematically keeps the best one, which manual planning cannot match beyond a few parts.
Can I stop parts from rotating?
Yes. Every part row has a rotation checkbox, and there is a global switch in settings. Turn rotation off for grain-critical pieces and the cutlist optimizer will only place them in the orientation you entered.
Is my parts list uploaded anywhere?
No. The cutlist optimizer runs entirely locally, and your list is saved only in your own browser storage. Nothing about your project is ever transmitted or stored on a server.
Can the optimizer handle MDF, particleboard or acrylic?
Yes — the engine is material-agnostic. Sheet size, kerf and rotation are the only material-dependent inputs, so the same cut list optimizer workflow covers plywood, MDF, melamine, foam board and acrylic.
What happens if a part does not fit?
The cutlist optimizer lists every unplaced part with a reason: wider or taller than the usable sheet area, no sheets left in your quantity, or only fitting once kerf is ignored. Fix the input or increase stock and re-run.
What is the difference between guillotine and free nesting mode?
Guillotine mode plans layouts where every saw cut crosses its region edge to edge — exactly what a table saw, panel saw or track saw can cut — and it is the default. Free nesting mode (MaxRects) packs parts tighter but may need cuts that stop mid-sheet, which suits CNC and laser machines. The cutlist optimizer runs whichever mode you pick.
References & sources
“Cutting and packing problems ask how large objects are cut into smaller pieces so that demand is met and the consumption of material — or waste — is minimized.”
— Dyckhoff, H. (1990), A Typology of Cutting and Packing Problems
- Jylänki, J. (2010). A Thousand Ways to Pack the Bin — A Practical Approach to Two-Dimensional Rectangle Bin Packing. — MaxRects heuristics used by this nesting engine.
- Burke, E. K., Kendall, G. & Whitwell, G. (2004). A New Placement Heuristic for the Orthogonal Stock-Cutting Problem. Operations Research, 52(4). — bottom-left placement for sheet cutting.
- Dyckhoff, H. (1990). A Typology of Cutting and Packing Problems. European Journal of Operational Research, 44(2), 145–159. — the standard classification of cutting problems.
Related cutting tools
Every tool runs locally in your browser and shares the same sheet-cutting engine.